Home Tech Tips About Us Contact Us
Pyramid Moulds Set of 10 - Cheops HDPE


Add to Cart

Add Review

This listing is for Pyramid Set that contains 10 different sizes molds that all have Golden section of Giza Pyramid, and have been made out of 5 and 6mm polyethylene 500 (HDPE) self-lubricating plastic, no releasing lubricants needed!

This mold set will be shipped flat, and in order to prepare the mold for casting you will need to close one open edge with scotch tape.
When you casting has cured, we recommend un-taping the mold and removing the casting this way, in order to avoid any possible damages to the edges of your casting.
When you remove your casting you can clean the mold with soft wipe soaked with acetone,it will nort effect your mold in any way, but will clean your mold ready for your next casting.
For best results, we recommend:

Use small amount of resin and perform pre-glazing your mold before you star casting your actual design. Mix small amount of resin and pour it into your mold, start tilting your mold in a way that allows you to cover with resin all internal walls, we recommend doing this procedure 2-3 times for best results.
This pre-glazing technique is well known to produce very nice and smooth casting walls, giving your work much more appealing to the aye pyramid

If you like to take it one step further then you can light sand your casting with sandpaper water grades 2000, 2500, 3000, then you finish your casting on sponge polishing pad mounted on drill or motor (ideally car polishing machine) with some car polishing compound you will be able to get very much mirror like finish.

This mold set contains:

1 x 30mm base / 18.73mm Height 5mm HDPE

1 x 40mm base / 25.45mm Height 5mm HDPE

1 x 50mm base / 31.82mm Height 5mm HDPE

1 x 60mm base / 38.18mm Height 5mm HDPE

1 x 70mm base / 44.55mm Height 5mm HDPE

1 x 80mm base / 50.91mm Height 5mm HDPE

1 x 90mm base / 57.27mm Height 5mm HDPE

1 x 100mm base / 63.63mm Height 5mm HDPE

1 x 120mm base / 76.36mm Height 6mm HDPE

1 x 140mm base / 89.09mm Height 6mm HDPE

Please bare in mind that above dimensions are take from inside the mold, therefor this will be you final casting size.
Currently there are no reviews for this product.
Currently there are no questions for this product.

Facebook Page YouTube Aldax Creative Blog

Join Our E-news List

* indicates required
Please click here to sign in or register.
Your Shopping Cart
Your basket is empty
Free Ebook
About UsPrivacy Policy    ABN: 34 000 081 247